Set up Apache virtual hosts on Ubuntu On EC2

25 Jul Set up Apache virtual hosts on Ubuntu On EC2

Posted at 20:20h in AWS by
2 Likes

Set up Apache virtual hosts on Ubuntu On EC2

Forward https://support.rackspace.com/how-to/set-up-apache-virtual-hosts-on-ubuntu/

Now that Apache is installed and running, you can configure it to serve multiple domains by using virtual hosts.

Create the layout

This example uses two domains: domain1.com and domain2.com.

  • In your home directory, create a public_html folder:
  • cd ~mkdir public_html
  • For each domain that you want to host, create a folder with a standard set of subfolders. The following commands create the folders public, private, log, cgi-bin, and backup for domain1.com and domain2.com:
  • mkdir -p /var/www/html/domain1.com/
  • mkdir -p /var/www/html/domain2.com/

Create index.html

The content of the public folder is up to you, but this example uses a very simple HTML file so that you can check the virtual host’s work.

  • For each domain, create an index.html file:
  • vim /var/www/html/domain1.com/public/index.html
  • Add the following code to the index.html file:
  • <html>
  • <head>
  • <title>domain1.com</title>
  • </head>
  • <body>
  • <h1>domain1.com</h1>
  • </body>
  • </html>
  • Repeat the process so that you have a similar file for domain2.com. Replace all instances of domain1.com with domain2.com.
  • vim /var/www/html/domain2.com/public/index.html

Add the following code to the index.html file:

  • <html>
  • <head>
  • <title>domain2.com</title>
  • </head>
  • <body>
  • <h1>domain2.com</h1>
  • </body>
  • </html>

Define virtual hosts

Now you have a basic structure for your two domains, you can define two virtual hosts.

Review NameVirtualHost

With virtual hosts, the NameVirtualHost setting often causes confusion.

Each interface and port on which Apache is set to listen to needs a NameVirtualHost directive. You can define the directive only once per port.

In the Apache layout for Ubuntu there is a default NameVirtualHost directive in the ports.conf file.

Run the following command to look at the contents of ports.conf:

vim /etc/apache2/ports.conf

You should get the following output (unless you’ve previously modified the file):

# If you just change the port or add more ports here, you will likely also

# have to change the VirtualHost statement in

# /etc/apache2/sites-enabled/000-default

NameVirtualHost *:80

Listen 80

<IfModule mod_ssl.c>

# SSL name based virtual hosts are not yet supported, therefore no

# NameVirtualHost statement here

Listen 443

</IfModule>

The default NameVirtualHost setting satisfies the requirements at present – Apache will apply named based virtual host logic and settings for HTTP requests made on any available interface (*) at port 80.

Note: The placement of the default NameVirtualHost directive in ‘ports.conf’ is new to Ubuntu’s Apache layout; prior Ubuntu releases placed a similar setting in the default vhost.

Define custom virtual hosts

Now you are ready to add your own virtual hosts so that you can start to serve your domains.

Create the vhost file for domain1:

sudo vim /etc/apache2/sites-available/domain1.com.conf

The contents looks as follows:

# Place any notes or comments you have here

# It will make any customisation easier to understand in the weeks to come

# domain: domain1.com

# public: /var/www/html/domain1.com/

<VirtualHost *:80>

# Admin email, Server Name (domain name) and any aliases

ServerAdmin webmaster@domain1.com

ServerName domain1.com

ServerAlias www.domain1.com

# Index file and Document Root (where the public files are located)

DirectoryIndex index.html

DocumentRoot /var/www/html/domain1.com

# Custom log file locations

LogLevel warn

ErrorLog /var/log/apache2/error-domain1.com.log

CustomLog /var/log/apache2/access-domain1.com.log combined

</VirtualHost>

Create the vhost file for domain2:

sudo vim /etc/apache2/sites-available/domain2.com.conf

The contents looks as follows:

# Place any notes or comments you have here

# It will make any customisation easier to understand in the weeks to come

# domain: domain2.com

# public: /var/www/html/domain2.com/

<VirtualHost *:80>

# Admin email, Server Name (domain name) and any aliases

ServerAdmin webmaster@domain2.com

ServerName domain2.com

ServerAlias www.domain2.com

# Index file and Document Root (where the public files are located)

DirectoryIndex index.html

DocumentRoot /var/www/html/domain2.com

# Custom log file locations

LogLevel warn

ErrorLog /var/log/apache2/error-domain2.com.log

CustomLog /var/log/apache2/access-domain2.com.log combined

</VirtualHost>

Enable the site

Enable the site as follows:

sudo a2ensite domain1.com

sudo a2ensite domain2.com

The output of the command is as follows:

Site domain1.com installed; run /etc/init.d/apache2 reload to enable.

Site domain2.com installed; run /etc/init.d/apache2 reload to enable.

Run the recommended command:

sudo /etc/init.d/apache2 reload

Navigate to the site

Define the index file

Define the index file (the home page that is shown when the domain address is entered). This is useful if you have wanted the user to be directed to an alternate page or to a nonstandard home page.

DirectoryIndex index.html

Note: This is not a good method for redirecting users because they might go directly to a nonspecified page, such as domain.com/index.php, while the DirectoryIndex value works only for those entering domain.com.

Define the document path

Define the location of the domain’s public files. Use an absolute path name.

DocumentRoot /var/www/html/domain.com

Set the log files

Set the log levels and the location for the virtual hosts’ log files.

LogLevel warn

ErrorLog /var/log/apache2/error-mydomainname.com.log

CustomLog /var/log/apache2/access-mydomainname.com.log combined

Define error documents

Set the ErrorDocument, which is used for all the standard error messages.

ErrorDocument 404 /errors/404.html

ErrorDocument 403 /errors/403.html

In this example, there is an ‘errors’ folder in the public directory. Each error document was created and placed in the errors folder. The paths shown are relative to the DocumentRoot folder defined previously.

If error messages are not defined, Apache generates its own error pages. Custom error pages are more user-friendly and can be customized as much, or as little, as you want.

Define Apache footers

Define ServerSignature to specify whether the server details are displayed in any server-generated error pages or index lists. Options are On, Off, and Email.

ServerSignature On

The level of detail in the signature is configured via ServerTokens, which cannot be set in the Virtual Hosts file. For Ubuntu’s Apache layout, this is properly set in ‘/etc/apache2/conf.d/security’. See the Apache configuration #2 NEED LINK article for more details.

If ServerSignature is set to Email, the ServerAdmin email will be displayed.

Enable cgi-bin

Enable the cgi-bin location as defined by the custom virtual hosts layout. You can leave cgi-bin in the DocumentRoot location if you so want.

ScriptAlias /cgi-bin/ /var/www/html/domain.com/cgi-bin/

<Location /cgi-bin>

Options +ExecCGI

</Location>

Set directory options

Set the options for the specified directory. The following example enables the FollowSymLinks option for the public directory of domain.com.

Options FollowSymLinks

Following are other options that you can set:

Directory browsing option

To turn off directory browsing, use -Indexes. To turn on directory browsing, use +Indexes.

Options -Indexes

SSI option

Enable or disable Server Side Includes. The following example disables it.

Options -Includes

Symlinks option

Enable or disable the option to follow symlinks. Be careful with this option because it can lead to security risks (inadvertently linking to configuration folders).

Options -FollowSymLinks

You can consider using the SymLinksIfOwnerMatch directive instead of FollowSymLinks. The SymLinksIfOwnerMatch directive allows symbolic links to be followed only if the owner of the link is identical to the owner of the target file or directory (in terms of Linux file system ownership/permissions). This prevents many of the security risks that a simple FollowSymlinks directive can create.

.htaccess option

Set AllowOverride to None to disable .htaccess support. Set it to All to allow support.

AllowOverride None

You can also specify which .htaccess features to enable, such as:

AllowOverride AuthConfig Indexes

The Apache htaccess and AllowOverride docs have more information about the different features.

Remember to specifically protect your .htaccess file. You can do this by renaming it to something obscure and denying access access to the file from external sources:

AccessFileName .myobscurefilename

<Files ~ “^\.my”>

<SatisfyAll>

Require all denied

</SatisfyAll>

</Files>

Note: The preceding example is formatted for Apache 2.4. If using 2.2, replace <SatisfyAll> Require all denied </SatisfyAll> ** with **Order Allow,Deny | Deny from all | Satisfy all.

No Options

Specify None to turn off all the available options.

Options None

Options hierarchy

The options directives can be set per-directory, as shown in the following example:

AllowOverride None

Options None

AllowOverride All

The first directory setting would turn off all options and disable .htaccess support for all directories.

However, the second directory setting would override the first and allow .htaccess support for the domain.com/public directory.

Summary

The virtual host’s file is an easy tool to use but a very powerful one. We recommend that you enter one setting and then test it. Then enter the next setting and test, and so on.

After you become familiar with it, you will see you have fine control over all of your web folders and files.

No Comments

Post A Comment